EEMCS EPrints Service
|
||||||||||||||||
2011
Krijnen, B. and Hogervorst, R. and van Dijk, J.W. and Engelen, J.B.C. and Woldering, L.A. and Brouwer, D.M. and Abelmann, L. and Soemers, H.M.J.R.
(2011)
A Thermal displacement sensor in MEMS [Towards accurate small-scale manipulation].
Mikroniek, 51 (4).
pp. 5-11.
ISSN 0026-3699
Krijnen, B. and Hogervorst, R.P. and van Dijk, J.W. and Engelen, J.B.C. and Woldering, L.A. and Brouwer, D.M. and Abelmann, L. and Soemers, H.M.J.R.
(2011)
A single-mask thermal displacement sensor in MEMS.
Journal of micromechanics and microengineering, 21 (7).
pp. 074007-074019.
ISSN 0960-1317
*** ISI Impact 2,276 ***
Reilink, R. and Visser, L.C. and Brouwer, D.M. and Carloni, R. and Stramigioli, S.
(2011)
Mechatronic design of the Twente humanoid head.
Intelligent Service Robotics, 4 (2).
pp. 107-118.
ISSN 1861-2776
2010
Brouwer, D.M. and Otten, A. and Engelen, J.B.C. and Krijnen, B. and Soemers, H.M.J.R.
(2010)
Long-range elastic guidance mechanisms for electrostatic comb-drive actuators.
In: Proceedings of the Tenth International Conference of the European Society for Precision Engineering & Nanotechnology, 31 May - 4 Jun 2010, Delft, The Netherlands.
pp. 47-50.
Delft University .
ISBN 978-0-9553082-8-4
Hogervorst, R.P. and Krijnen, B. and Brouwer, D.M. and Engelen, J.B.C. and Staufer, U.
(2010)
A single-mask thermal displacement sensor in MEMS.
In: Proceedings of the Tenth International Conference of the European Society for Precision Engineering & Nanotechnology, 31 May - June 4 2010, Delft, The Netherlands.
pp. 462-465.
Delft University.
ISBN 978-0-9553082-8-4
de Jong, B.R. and Brouwer, D.M. and de Boer, M.J. and Jansen, H.V. and Soemers, H.M.J.R. and Krijnen, G.J.M.
(2010)
Design and Fabrication of a Planar Three-DOFs MEMS-Based Manipulator.
Journal of microelectromechanical systems, 19 (5).
pp. 1116-1130.
ISSN 1057-7157
*** ISI Impact 2,157 ***
Krijnen, B. and Hogervorst, R.P. and Engelen, J.B.C. and van Dijk, J.W. and Brouwer, D.M. and Abelmann, L.
(2010)
Single-mask thermal displacement sensor in MEMS.
In: Proceedings of the 21st Micromechanics and Micro systems Europe workshop (MME 2010), 26-29 sept 2010, Enschede, The Netherlands.
pp. 52-55.
University of Twente - TST.
ISBN 978-90-81673716
2009
Brouwer, D.M. and Bennik, J. and Leideman, J. and Soemers, H.M.J.R. and Stramigioli, S.
(2009)
Mechatronic design of a fast and long range 4 degrees of freedom humanoid neck.
In: Robotics and Automation, 2009. ICRA '09. IEEE International Conference on, 12-17 May 2009, Kobe, Japan.
pp. 574-579.
IEEE Robotics and Automation Society.
ISBN 978-1-4244-2789-5
Brouwer, D.M. and de Jong, B.R. and de Boer, M.J. and Jansen, H.V. and van Dijk, J. and Krijnen, G.J.M. and Soemers, H.M.J.R.
(2009)
MEMS-based clamp with a passive hold function for precision position retaining of micromanipulators.
Journal of micromechanics and microengineering, 19 (6).
pp. 1-20.
ISSN 0960-1317
*** ISI Impact 2,276 ***
Reilink, R. and Visser, L.C. and Bennik, J. and Carloni, R. and Brouwer, D.M. and Stramigioli, S.
(2009)
The Twente humanoid head.
In: IEEE International Conference on Robotics and Automation, ICRA 2009, 12-17 May 2009, Kobe, Japan.
pp. 1593-1594.
IEEE Robotics and Automation Society.
ISBN 978-1-4244-2788-8
Wassink, M. and Carloni, R. and Brouwer, D.M. and Stramigioli, S.
(2009)
Novel Dexterous Robotic Finger Concept with Controlled Stiffness.
In: Proceedings of the 28th Benelux Meeting on Systems and Control, 16-18 March 2009, Spa, Belgium.
115.
DISC Graduate School.
ISBN not assigned
2007
Brouwer, D.M.
(2007)
Design principles for six degrees-of-freedom MEMS-based precision manipulators.
PhD thesis, University of Twente.
ISBN 978-90-365-2510-7
2006
Brouwer, D.M. and de Jong, B.R. and de Boer, M.J. and Soemers, H.M.J.R.
(2006)
Rotational precision mems-based clamping mechanism for stable fixation of elastic mechanisms.
In: Proceedings of the Annual Meeting of the American Society of Precision Engineering (ASPE), October 15-20, 2006, Monterey CA, USA.
pp. 275-278.
MEMS, LIGA & Nanotechnology.
American Society for Precision Engineering.
ISSN not assigned
Brouwer, D.M. and de Jong, B.R. and Soemers, H.M.J.R. and van Dijk, J.
(2006)
Sub-nanometer stable precision MEMS clamping mechanism maintaining clamp force unpowered for TEM application.
Journal of micromechanics and microengineering, 16 (6).
pp. 7-12.
ISSN 0960-1317
*** ISI Impact 2,276 ***
de Jong, B.R. and Brouwer, D.M. and Jansen, H.V. and de Boer, M.J. and Lammertink, T.G. and Stramigioli, S. and Krijnen, G.J.M.
(2006)
A planar 3 dof sample manipulator for nano-scale characterization.
In: 19th IEEE International Conference on Micro Electro Mechanical Systems, 2006, May 2006, Istanbul.
pp. 750-753.
IEEE Computer Society.
ISSN 0018-9219
ISBN 0-7803-9475-5
2005
Brouwer, D.M. and de Jong, B.R. and Soemers, H.M.J.R. and van Dijk, J.
(2005)
Sub-nanometer stable precision MEMS clamping mechanism maintaining clamp force un-powerd for TEM application.
In: Proceedings of the 16th MME MicroMechanics Europe Workshop, 4-6 September, Göteborg, Sweden.
pp. 1-4.
Chalmers University.
ISBN 91-631-7553-3
de Jong, B.R. and Brouwer, D.M. and Jansen, H.V. and de Boer, M.J. and Krijnen, G.J.M.
(2005)
Nanometer resolution TEM sample manipulator for rotational and translational positioning.
In: Proceedings of EuroSensors XIX 2005, 11-14 September 2005, Barcelona, Spain.
pp. 1-4.
Elsevier.
ISBN 84-475-2984-3
|
||||||||||||||||